![]() Step Five: Apply Additional Coats if Desired. Also try to smooth out any ridges or marks in the plaster’s surface. Again use random, overlapping strokes to apply the plaster one small space at time and fill in any areas that were missed with the first coat. Then hold the desired trowel at a 60 to 90 degree angle with the wall and apply another thin coat of plaster. As with the first coat, use the small trowel to scoop the plaster from the can and to apply it to the larger trowel if necessary. The second coat must be applied with a trowel a roller cannot be used. Step Four: Apply the Second Coat of Venetian Plaster.Īfter the first coat has dried, apply your second coat of Venetian plaster. With either method, wipe the trowel with a rag or paper towel often to keep the plaster from building up on the edges of the trowel and transferring in hardened clumps to the wall. This skimming method will even out the plaster and ensure that the final product looks like marble. Go over the rolled area with your trowel, holding the instrument at a 10 to 30 degree angle and using random strokes. ![]() If you do, the plaster will dry, and you won’t be able to smooth out any imperfections. As with the trowel method, do not try to tackle an entire wall at once. Once you have loaded your roller with the Venetian plaster, roll the plaster onto the wall. Then use the spray bottle of water to dampen your paint roller before dipping it in the plaster. Pour some of the Venetian plaster into a paint tray. The second method of application is with a roller. If you should miss covering any areas with plaster, you will be able to fill them in later with the second coat. You should also cover only one small area of wall at a time to ensure the plaster’s pliability. If possible, you should start your application in a corner and use random-sized and random-spaced strokes. Otherwise, hold the small trowel at a 10 to 30 degree angle with the wall and apply the Venetian plaster. Use the smaller trowel to scoop some of the Venetian plaster from the can and apply it to the larger trowel if you plan on working on a larger space. The initial coat of Venetian plaster can be applied in one of two ways. Step Three: Apply the First Coat of Venetian Plaster. If you plan on using steel trowels, sand their edges and corners to prevent any imperfections in the steel from marring your finish. Lay drop cloths on your floors and furniture. Tape off all windows, doors, and molding-basically, any adjoining surface that you don’t want the Venetian plaster to touch. If your wall is painted with a satin, semi-gloss, or gloss paint, paint over it with a coat of primer or a coat of flat paint that matches the color of your Venetian plaster. Then clean the wall of all dust and dirt. Fill in any holes with spackle and sand flat any imperfections. If wallpaper is present, remove it from the wall. Paper towels or rags to wipe the trowels clean.ĭrop cloths for your floors and furniture.Īdditional items may also be used with this paint technique:Ī can of Venetian plaster topcoat like the Home Depot’s Behr Premium Plus with Style Venetian Plaster Topcoat or Lowe’s Valspar Signature Colors Venetian Plaster Topcoat While you can use a steel trowel to apply all colors of Venetian plaster, a plastic trowel will ensure that the steel does not leave behind gray marks or rust on lighter colors of plaster. You will use the larger trowel to apply the plaster to more open spaces. ![]() You will use the small trowel to apply the plaster to tighter spaces like corners and the area around your windows and doors and to scoop the plaster out of the can. There are several materials you must have on hand to create the Venetian plaster effect:Ī can of Venetian plaster like the Home Depot’s Behr Premium Plus with Style Venetian Plaster or Lowe’s Valspar Signature Colors Venetian Plaster.Ī large and small trowel. Instead, with a little time and patience, you, too, can apply Venetian plaster to your walls. Although there are many steps involved in achieving this look, you do not have to leave it up to the professionals to do. Venetian plaster is a paint treatment that adds a multi-tonal element to your walls, stimulating both the look and the shine of Italian marble. Anyone who has ever watch an episode of Trading Spaces that featured Doug Wilson as one of the two guest designers is well acquainted with the faux-painting technique called Venetian plaster. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |